Welcome to the official website of Nanda Automation Technology Jiangsu Co.,Ltd

CN  丨  EN

这是描述信息
这是描述信息
南大傲拓科技江苏股份有限公司

Product

All categories
搜索
Search
  • NAProSetupV606.rar

  • NAProSetupV580.rar

  • NA400PLCUserManual(V27).rar

  • NA400PLC.rar

NA400-DeviceNet master module
0.0 0.0

Model

CMM401-0106

Order number

400CMM4010106

Power consumption

3.0W/5V

Current consumption

600mA/5V

Number of communication ports

1

Interface Type

5-pin open DeviceNet connector (5.08mm), CAN interface

Supported baud rate

125 kbps ,250kbps,500kbps

Type of information

I/O polling Dominant

Maximum number of sites per network

64 (including 1 master station)

Programming Drive

Programmable

Weight

250g

Dimensions (W×H×D) (mm)

40×145×158

 

*The information provided in this article is just a general description and feature introduction of the product. The content in this article may change with the further development of the product, and the right of interpretation belongs to Nanda Automation Technology Co., Ltd.

Product description
Parameters
Performance parameters
Download

DeviceNet master module

CMM401-0106

 


Features

Complete communication tasks independently, only complete data exchange with the CPU, and do not occupy CPU resources.

The data exchange with the CPU module uses a single internal network, which is separated from the internal network of the I/O module to reduce the burden of internal network communication.

Number of communication nodes: maximum 64, supports up to 63 DeviceNet slave nodes.

Support standard baud rate: 125kbps, 250kbps, 500kbps.Support to send explicit message to read/write slave data through PLC ladder diagram.

Automatically exchange data with PLC host modules, users only need to program PLC related registers.

Provide a space with a definable number of bytes as the I/O input data area and output data area.

The intelligent module has a self-diagnosis function, and can automatically reset and restart when the module fails.

Supports online removal and installation of slave devices without disconnecting the network.

Comprehensive LED indication function.

The configuration parameters are not lost after power off, and the CPU automatically loads the parameters after power on.

Self-powered DeviceNet devices are compatible with network connections.

Support hot swap.

 

*The information provided in this article is just a general description and feature introduction of the product. The content in this article may change with the further development of the product, and the right of interpretation belongs to Nanda Automation Technology Co., Ltd.

Scan the QR code to read on your phone
We could not find any corresponding parameters, please add them to the properties table

Model

CMM401-0106

Order number

400CMM4010106

Power consumption

3.0W/5V

Current consumption

600mA/5V

Number of communication ports

1

Interface Type

5-pin open DeviceNet connector (5.08mm), CAN interface

Supported baud rate

125 kbps ,250kbps,500kbps

Type of information

I/O polling Dominant

Maximum number of sites per network

64 (including 1 master station)

Programming Drive

Programmable

Weight

250g

Dimensions (W×H×D) (mm)

40×145×158

 

*The information provided in this article is just a general description and feature introduction of the product. The content in this article may change with the further development of the product, and the right of interpretation belongs to Nanda Automation Technology Co., Ltd.

底部二维码

Time of issue:2020-06-24 00:00:00

Welcome  to  Nanda

Automation  official  Wechat

底部联系方式

Time of issue:2020-06-24 00:00:00

Address: 199 Qingshui Ting West Road, Jiangning Economic Development Zone, Nanjing

Telephone: 025-68530188 (Switchboard)

Fax: 025-68530178

Service Hotline: 400-025-0150

Technical support: 025-68530179

底部备案号

Time of issue:2020-06-22 00:00:00

Nanda Automation Technology Jiangsu Co., Ltd.     Record number: 苏ICP备090423423号-1