Welcome to the official website of Nanda Automation Technology Jiangsu Co.,Ltd

CN  丨  EN

这是描述信息
这是描述信息
南大傲拓科技江苏股份有限公司

Product

All categories
搜索
Search
There is currently no content to display
Please add data record on website background.
Wireless dead point switch
0.0 0.0

Technical parameters

SENS100-39CC-C type dead point switch (as shown in Figure 2)

无线死点开关

● Shell: nickel-copper alloy

● Test frequency: ≥200Hz

● Power supply: 3.3VDC

● Signal: normally open

● Load current: <10mA

● Ambient temperature: -40 ~ 80℃

● Protection level: IP67

● Connection method: 3-core sheathed shielded cable, RVV 3×0.5mm²

● Detection distance: ≤50mm (related to the strength of the magnet, the sensing distance is different)

● Size and structure: φ18×80, fixing nut M18×1

 

SENS100-39CWB wireless dead point switch module (as shown in Figure 3)

无线死点开关

● Range of strokes: 0.2-10 times/min 1.0%F.S

● Battery capacity: 3.6VDC/19000mah

● Working hours: ≥1.5 years

● Sleep current: 0.1mA; average working current: 13mA

● Communication interface: ZigBee 2.4G IEEE802.15.4

● Waterproof box size: 125*80*58mm

● Installation method: foot clip screw fixing

● Operating temperature: -40℃ ~ 80℃

● Protection grade: IP65

● Status indication: red and green LED.

Product description
Parameters
Performance parameters
Download

This product (shown in Figure 1) uses a normally open proximity switch sensor with a high response frequency, which generates a switching signal through magnetic induction, combined with a high-speed digital acquisition circuit, to stroke the pumping unit, the dead point position of the pumping unit, etc. Non-contact measurement of parameters. Using advanced local wireless communication technology, combined with wireless load sensors for real-time measurement and upload of oil well dynamometer diagrams.

Scan the QR code to read on your phone
We could not find any corresponding parameters, please add them to the properties table

Technical parameters

SENS100-39CC-C type dead point switch (as shown in Figure 2)

无线死点开关

● Shell: nickel-copper alloy

● Test frequency: ≥200Hz

● Power supply: 3.3VDC

● Signal: normally open

● Load current: <10mA

● Ambient temperature: -40 ~ 80℃

● Protection level: IP67

● Connection method: 3-core sheathed shielded cable, RVV 3×0.5mm²

● Detection distance: ≤50mm (related to the strength of the magnet, the sensing distance is different)

● Size and structure: φ18×80, fixing nut M18×1

 

SENS100-39CWB wireless dead point switch module (as shown in Figure 3)

无线死点开关

● Range of strokes: 0.2-10 times/min 1.0%F.S

● Battery capacity: 3.6VDC/19000mah

● Working hours: ≥1.5 years

● Sleep current: 0.1mA; average working current: 13mA

● Communication interface: ZigBee 2.4G IEEE802.15.4

● Waterproof box size: 125*80*58mm

● Installation method: foot clip screw fixing

● Operating temperature: -40℃ ~ 80℃

● Protection grade: IP65

● Status indication: red and green LED.


底部二维码

Time of issue:2020-06-24 00:00:00

Welcome  to  Nanda

Automation  official  Wechat

底部联系方式

Time of issue:2020-06-24 00:00:00

Address: 199 Qingshui Ting West Road, Jiangning Economic Development Zone, Nanjing

Telephone: 025-68530188 (Switchboard)

Fax: 025-68530178

Service Hotline: 400-025-0150

Technical support: 025-68530179

底部备案号

Time of issue:2020-06-22 00:00:00

Nanda Automation Technology Jiangsu Co., Ltd.     Record number: 苏ICP备090423423号-1